Drum lids and taps for paint and chemicals

Drum lids and taps

Materials: PP, PA, galvanized steel
Most common neck finishes:  2'' - 3/4''
Uses :

  • Chemicals products (solvent, stripper, glue, fertiliser, paint, coatings, lacquers, ink, colourant, varnish, resins, etc.)
  • Petroleum products (lubricants, greases, fuels, etc.)
  • Cleaning products (laundry detergents, soap, cleansers, detergents, etc.)
  • Fine chemicals (flavourings, fragrances, extracts, concentrates, essential oils, etc.)
  • Food products (oils and vinegars, liquid food products, etc.)
  • Cosmetics and pharmaceuticals : finished good (shampoos, shower gels, creams, lotions, hair care, liquid or viscous pharmaceuticals products, etc.) and raw materials to elaborate cosmetics/pharmaceuticals products (perfumes, essential oils, active pharmaceutical ingredients, etc.)



The Company warrants the functionality of the components of the supplies sold. The customer is responsible for checking the physical and chemical compatibility with its products under normal conditions of use, storage and transport, without liability to the Company. See our "General Terms and Conditions"

* Please, log in to your account or contact us to ensure the food grade standards of our packagings.

   1  2  3     Display
Product Product name Neck finish Tri des Range / Type Tri des Material Tri des Colour Tri des Sealed Tri des
White PA/PP 2 inch PlastiPlug cap BSP 56x4 (gas thread) with knockout, rubber gasket
Ref. 17502
White PA/PP 2 inch PlastiPlug cap BSP 56x4 (gas thread) with knockout, rubber gasket 2 inch Knockout tap PA/PP White Joint Caoutchouc
White PP 3/4 inch PlastiPlug cap BCS 56x4, solid, PE gasket
Ref. 11033
White PP 3/4 inch PlastiPlug cap BCS 56x4, solid, PE gasket 3/4 inch Full PP White PE liner
Galvanized metal cap, 3/4 inch thread G3/4 R-Plug, solid, ext plain, int lined, PE gasket
Ref. 17295
Galvanized metal cap, 3/4 inch thread G3/4 R-Plug, solid, ext plain, int lined, PE gasket 3/4 inch Full Galvanized Bare PE liner
Galvanized metal cap, 2 inch thread G2 R-Plug, solid, ext plain, int lined, PE gasket
Ref. 16668
Galvanized metal cap, 2 inch thread G2 R-Plug, solid, ext plain, int lined, PE gasket 2 inch Full Galvanized Bare PE liner
Red HDPE seal, 2 inch DIN Mauser for Bung S70x6
Ref. 17210
Red HDPE seal, 2 inch DIN Mauser for Bung S70x6 2 inch DIN Cap & snap lid HDPE Red
Bouchon Galva 2 Pouces Pleine
Ref. 11935
Bouchon Galva 2 Pouces Pleine 2 inch Full Galvanized Bare Joint Caoutchouc
Grey PE 60mm Flexspout cap FS-10-10, unlined
Ref. 12705
Grey PE 60mm Flexspout cap FS-10-10, unlined Opening 60mm Flexspout Flexspout PE Grey unlined
White PP 2 inch PlastiPlug cap BSP 56x4 (gas thread) with knockout, rubber gasket
Ref. 11941
White PP 2 inch PlastiPlug cap BSP 56x4 (gas thread) with knockout, rubber gasket 2 inch Knockout tap PP White Joint Caoutchouc
White PP 2 inch PlastiPlug cap BCS 56x4, solid, EPDM gasket
Ref. 14404
White PP 2 inch PlastiPlug cap BCS 56x4, solid, EPDM gasket 2 inch Full PP White Joint EPDM
White PP 2 inch PlastiPlug cap BCS 56x4, solid, PE gasket
Ref. 11032
White PP 2 inch PlastiPlug cap BCS 56x4, solid, PE gasket 2 inch Full PP White PE liner
   1  2  3     Display

Any question ?

Would you like to join a salesperson or do you need help ?

Click here

Follow us on
LinkedIn and Viadeo!